Relay Receiver Board Parameter

• Working voltage  :  AC 85V~250V

• Input vlotage  :  1~250V

• Output vlotage  :  1~250V

• Quiescent Current  :  <5MA

• Max current  :  10A

• Max load:   2200W

• RF frequency  :  433MHz

• Pin  :  NO / COM / NC

• Remote control battery : 2*CR2016(include)

• Working temperature  :  -30~+80 Celsius

• Receiving Sensitivity  :  >97dbm

• Amount of storage remote controls  :  20 pieces

• Support encoding  :  1527 Learning code /2262 fixed code

• RF Operating mode  :  ASK superheterodyne wireless reception

• Receiving range  :  Open space is more than 50 meters

• Remote operating mode   :Momentary Mode/Toggle Mode / Latched Mode

Product Application Area
Products can be used in homes, farms, factories, offices, laboratories, supermarkets and so on.
Remote control garage door   Electric door house door shutter door  expansion door gate door road gate
Remote control Electric curtain Water pump Fan Lamp LED light  bulb  ventilation device  Signal transmission
Remote control motor positive and negative rotation   motor switch DIY

Working Modes
Toggle mode:
Press ▲(A) button,the relay will work;press ▼(B) button again,this relay will stop.
Latched mode:
Press ▲(A) button,the relay will on;press ▼(C) button ,this relay will off,press □(B)button,this relay will stop.

How to Set up
Toggle mode:
Press learning button 2 times,press▲(A)  button once,press▼(B) button once,succeed.
Latched mode:
Press learning button 3 times,press ▲(A) button once,press ▼(C) button once,press □(B)button once,succeed.

Clean data:
Press learning button 9 times,the data will be cleaned.
(If you want to change modes,you need to clean the data first.)