今日の為替レート
お振込銀行
クレジットカード支払い
 |
ログイン | LOGIN
商品カテゴリー
- ブランドファッション
- ファッション/雑貨
- ビューティー
- 食品
- 出産/育児
- 生活雑貨
- パソコン
- レジャー
범용 무선 리모컨 스위치 조명 차고 게이트 크레인 DIY용 2CH 릴레이 모듈 500m 송신기 433MHz 110V 220V
|
|||||||||||||||||
| 商品購入についてのご案内 | |||
|
|||
Dear customer, our options are equipped with 1~2 remote controls. If you need more remote controls, please contact us, thank you.
Product application areas
●Products can be used in homes, farms, factories, offices, laboratories, supermarkets, etc.
●Remote control garage doorelectric doorhouse doorrolling doortelescopic doorgatebarrier gate
●Remote control electric curtainswater pumpsfansdesk lampsLED lightsbulbsventilation devicessignal transmission
●Remote control motor forward and reversemotor switchDIY
for remote control lights
for remote controlled garage doors
The signal is stable and can pass through walls, and the pairing is flexible. The remote control distance can reach 500meters (in an open area). One receiver can be paired with up to 25 remote controls.
Relay Receiver Board Parameter
Working voltage : AC 85V~250V
Input vlotage : 1~250V
Output vlotage : 1~250V
Quiescent Current : <5MA
Max current : 10A
Max load: 2200W
RF frequency : 433MHz
Pin : NO / COM / NC
Working temperature : -30~+80 Celsius
Receiving Sensitivity : >97dbm
Amount of storage remote controls : 20 pieces
Support encoding : 1527 Learning code /2262 fixed code
RF Operating mode : ASK superheterodyne wireless reception
Receiving range : Open space is more than 50 meters
Remote operating mode :Momentary Mode/Toggle Mode / Latched Mode
L(Live wire): Input 85V - 250V Live wire
N(Neutral wire):Input 85V - 250V Neutral wire
NC:Normally closed pin
COM:Common pin
NO:Normally open pin
Remote controller Parameter
RF frequency : 433MHz
Control Distance : 500 meters in open space
Material : Plastic
Support encoding : 1527 Leaning code
Battery : 23A 12V (included)
Size:90*40*14mm
Base: included
Wiring diagram
If you have any questions, please contact us, we will try our best to answer, thank you.
Operation Mode
●Momentary Mode:
1. Press and hold one button, relay "1" will turn on;
2. Release the button, this relay "1" will turn off.
●Toggle Mode:
1. Press "A" key, relay "1" will turn on;
2. Press "A" key again, this relay "1" will turn off.
●Latched mode(This mode requires a remote control with at least 3 buttons or more):
1.Press "▲" key, relay "1" will turn on;
2.Press "▼" key, relay "2" will turn on, at the same time relay "1" will turn off.
3.Press "■" key, Both relays "1" and "2" will turn off.
How to set up
1.Memontary Mode: Press learning button on the switch 1 time,press any remote button 1 time,succeed
2.Toggle Mode: Press learning button on the switch 2 times,press any remote button 1 time,succeed
3.Latched mode: Press learning button on the switch 3 times,press ▲ button 1 time,press ▼ button 1 time,succeed
Reset
1.Press learning button 8 times to clean data,then all remotes can not control this receiver
Notice:
1. Reset before you want to change the operating mode of one remote control.
2. After reset, all the remote controls can not work anymore.
3. Replace the battery in time when the remote control voltage is low. To get the stronger signal transmission.
4. Slightly stretch the antenna on the receiver for better signal reception.
5. The remote control need to have at less 3 or more buttons if you want to set up latched mode.
------------------------------------------------------------------------------------------------------------------------------
Please contact with us if you have any questions.Thank you.
